Cotton Inserter  

The CVC Cotton Inserter converts cotton into preset lengths. The coil is pulled apart

into desired lengths by feeding through two pairs of pinch rollers, each piece is then

folded and inserted up into a tube, forming the "inverted U", the tube then moves over

the bottle and the cotton piece is inserted down into the bottle by means of a air cylinder

(FESTO)

 

‧ This system is applicable for most weight and grades of continuous cotton.

‧ Cotton piece length can be set from 2" to 6" (straight length before folding).

‧ Capable to place one through ten inserts per bottle.

‧ Machine Capacity: 60 cycles per min.

‧ Output Counter.

‧ Two modes available: automatic operation and manual operation for testing.

‧ The CVC 1107 can be fitted over existing conveyor along with bottle gating system and sensor for automatic line production.

‧ Contact parts in stainless steel and PC material.

‧ Meet cGMP requirements.

 

 

 

Technical Data:

Bottle opening: 1" - 2" (25 - 50 mm)

Power Source: 220V , 50/60 Hz, single phase

Power consumption: 1.6 KW

Compressed Air Pressure: 87 psi (6Kg/cm2)

Compressed Air consumption: 3.5 cfm (100~110 liters/min)

Machine Dimensions: L. 27 5/16" x W. 23 9/16" x H.51 3/16"

(693mm x 598mm x 1300 mm)

 

 

 
 

                      CVC 1117