CVC Electronic Tablet/Capsule Counting Machine Model 1220

Unit comes mounted on a Stainless Steel base. Features completely sealed vibrator drives which are mounted on an electric adjustable support frame and housing the electric and electronic controls of the counting machine. Comes with the following: Vibrator Hopper with outlet gate. Capacity: 25-30 liters. Electrical Height Adjustment which allows the running of containers of differing heights without change parts. Comes with 2 Vibrator Plates with 12 V-shaped Channels. The 12 channel counting unit has an individual detection system in each channel to count the products in free fall. Each detecting system has a special dust compensator to avoid incorrect counting. There is a Pneumatic Memory Flap System which is operated by 12 two-stroke cylinders. Adjustable Single Outlet Funnel for easy to position above different diameters of containers/bottles. During filling, the bottle nozzle dips over the neck to the container/bottle to avoid any spilling of products. Control System with pneumatic and electronic design for operation and control of machine settings and product infeed flow. Memory up to 50 different programs can be stored in memory. Menu controlled operator panel contains numeric and function keys plus a two-line alpha numeric display. If the section is blocked, the counting machine will interrupt the filling of containers/bottles and display a message on the operator panel. The system will start automatically when blockage is corrected. Reject System is in place for wrong count. Comes mounted on the conveyor and automatically resets the count and will remove the incorrectly filled bottle out the track when a fault occurs. An allowance of 0 - 9 containers per minute can be keyed in the operator panel. Technical Data: Air Pressure: 6 Bar, 100 liters per minute per machine. Electrics: Single Phase, 220 volts, -15%+_10%, 50/60 Hz, 4.5 Amp (other voltage is available on request for an additional cost). Options: Bottle Infeed Turn Table for bottle loading and feeding to the counting machine. Table diameter: approximately 23 ½" (600mm). Table material: cast aluminum alloy. Delivery Time: Immediate.

CVC Electronic Tablet/Capsule Counting Machine Model 1220-2

Unit is mounted on a Stainless Steel base. Features: completely sealed vibrator drives which are mounted on an electric adjustable support frame and housing the electric and electronic controls of the counting machine. Vibratory Hopper: comes with an outlet gate and has a capacity of 25 – 30 liters. Electrical Height Adjustment: for differing heights of containers/bottles without change parts. Two Vibrator Plates with 12 V-shaped Channels: has an individual detection system in each channel to count the products in free fall. Each detecting system has a special dust compensator to avoid incorrect counting. Pneumatic Memory Flap System: operated by 12 two-stroke cylinders. Control System: Pneumatic and electronic design for operation and control of machines settings and product infeed flow. Service mode can be run for testing different parts individually. Memory: up to 50 different programs can be started in memory. Menu controlled operator panel contains numeric and function keys plus a two-line alpha numeric display. Back Up Switch: mounted at the outfeed side of the conveyor and checks whether the section is free or not. If the section is blocked, the counting machine will interrupt the filling of containers/bottles and display a message on the operator panel. The system will start automatically when blockage is corrected. Reject System: for wrong count; mounted on the conveyor; automatically resets the count and will remove the incorrectly filled bottle out the track when a fault occurs. An allowance of 0 - 9 containers per minute can be keyed in the operator panel. When the quantity of rejected containers/bottles per minute exceeds the set quantity, the counting machine will stop and display an error message. Single Container/Bottle Filling Conveyor: the single lane filling conveyor will fill plastic or glass containers/bottles. Synchronization Control System: conveyor is integrated with the counting machine. For operator ease, all electronic adjustments are made on the touch screen panel. Description per head: dual lane conveyor (shared); 12 counting channels; 2 product separating vibrators; Stainless Steel hopper; operator panel with LCD Display; and 1 Container/Bottle. Delivery Time: 10 weeks from receipt of 50% deposit. Crating: $430 US. Options: Fallen Container Detector (per conveyor track) $1,000 US Upside Down Container Detector (per conveyor track) $1,000 US Container/Bottle Nozzle $ 225 US Central Dust Extraction Terminal $ 500 US Note: 100 sample bottles for each type and size, as well as 1,000 tablets or capsules for each container/bottle type and size are required in order to prepare the machine and perform in-house trials prior to shipment.